Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

On Extracting Maximum Stable Sets in Perfect Graphs Using Lovász's Theta Function

We study the maximum stable set problem. For a given graph, we establish several transformations among feasible solutions of different formulations of Lovász's theta function. We propose reductions from feasible solutions corresponding to a graph to those corresponding to its induced subgraphs. We develop an efficient, polynomial-time algorithm to extract a maximum stable set in a perfect graph using the theta function. Our algorithm iteratively transforms an approximate solution of the semidefinite formulation of the theta function into an approximate solution of another formulation, which is then used to identify a vertex that belongs to a maximum stable set. The subgraph induced by that vertex and its neighbors is removed and the same procedure is repeated on successively smaller graphs. We establish that solving the theta problem up to an adaptively chosen, fairly rough accuracy suffices in order for the algorithm to work properly. Furthermore, our algorithm successfully employs a warm-start strategy to recompute the theta function on smaller subgraphs. Computational results demonstrate that our algorithm can efficiently extract maximum stable sets in comparable time it takes to solve the theta problem on the original graph to optimality. This work was supported in part by NSF through CAREER Grant DMI-0237415. Part of this work was performed while the first author was at the Department of Applied Mathematics and Statisticsat Stony Brook University, Stony Brook, NY, USA.     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Electrochemical Polymerization of Aniline at Low Supporting-Electrolyte Concentrations and Characterization of Obtained Films

Conductive polymers of aniline were synthesized in aqueous acidic media such as perchloric, sulfuric, hydrochloric, phosphoric, and trifluoroacetic acids and the effect of supporting electrolyte was investigated. The conductivity of each polyaniline (PAn) sample was determined by the four-probe technique. PAn (H₂SO₄) sample was shown to have the highest conductivity, specifically, 3.55 S cm^–1. The effect of concentrations of monomers and acids on the conductivity of PAn's was studied. It was observed that the conductivity decreased with increasing aniline concentration and increased with increasing sulfuric acid concentration. The conductivities of PAn (CF₃COOH) were also investigated in different supporting electrolytes and highly good increments of its conductivities were obtained. Magnetic properties of the PAn salts were analyzed by Gouy balance measurements and it was found that their conducting mechanisms are of bipolaron nature. From the FTIR analysis it was found that polymerization occurs via the –NH₂ group in a head-to-tail mechanism. The thermal analyses revealed that PAn (HCl) among the PAn salts studied shows the highest thermal stability. Surface analyses of polymers were clarified by scanning electron microscopy. From elemental analysis results, PAn salts were concluded to be in emeraldine structure.     

Construction of nonanuclear supramolecular structures from simple modular units

A porphyrazine based supramolecule with a nonanuclear structure has been prepared by the ready coordination of pyridine donor sites in octakis(4-pyridoxyethylthio)porphyrazinatomagnesium with vanadyl bis(acetylacetonate) and characterized by EPR spectroscopy.     

Lavandulifolioside: A New Phenylpropanoid Glycoside from Stachys lavandulifolia

A new phenlypropanoid glycoside has been isolated from the methanolic extract of the aerial parts of Stachys lavandulifolia (Lamiaceae), lavandulifolioside (1) . On the basis of chemical and spectral data the structure of the new compound 1 has been elucidated as β-(3,4-dihydroxyphenyl)ethyl O-α-L -arabinopyranosyl-(1→2)-α-L -rhamnopyranosyl-(1→3)-4-O-caffeoyl-β-D -glucopyranoside.     

Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Oxygen/nitrogen ordering in lanthanum new phase (La3Si8N11O4)

High-resolution ¹⁷O NMR spectra have been collected for crystalline samples of lanthanum new phase, La₃Si₈N₁₁O₄. In conjunction with previously published ²⁹Si and ¹⁵N spectra obtained for this phase, and in the light of the high-quality crystal structure data reported recently, a more detailed interpretation of the NMR spectra is presented than was possible in previous studies. The non-bridging oxygens in the structure are responsible for the single sharp peak seen in the ¹⁷O spectrum at 188 ppm; the remaining oxygens, occupying bridging sites shared with nitrogen, show up only weakly on the ¹⁷O spectrum as a broad diffuse band centered around zero ppm. The peak at −57.3 ppm on the ²⁹Si spectrum is believed to correspond to an overlap of [SiN₄] and [SiON₃] environments, with the −68.2 ppm peak corresponding to an [SiO₂N₂] environment.     

New glyoxime derivatives and their transition metal complexes

Two new vic-dioxime ligands and their complexes with Co⁺², Ni⁺², Cu⁺², Cd⁺², and Zn⁺² ions were synthesized. Primer amines (3,4-methylenedioxaaniline and 4-methylbenzylamine) reacted with antichloroglyoxime to give 3,4-methylenedioxaphenylaminoglyoxime (H₂L¹) and N-(4-methylbenzyl)aminoglyoxime (H₂L²) ligands. Structures of the ligands and their complexes are proposed based on elemental analyses, IR, UV-Vis, and ¹H NMR spectra, magnetic susceptibility measurements, and thermogravimetric analyses (TGA). The article was submitted by the authors in English.